A Simple Solution for Indirect Spend: One Creditor Instead of Many

Simple solutions for indirect spend: how one-off and small orders run through one fixed creditor instead of setting up every supplier from scratch.

Marvin Tekautschitz16 November 2026 · 7 min read
TL;DRRead this if ... your indirect spend is spreading across more and more small suppliers and every one-off order triggers a new supplier onboarding.
  1. 01

    Indirect spend gets messy wherever every one-off requirement calls for a new supplier and therefore a new creditor.

  2. 02

    Catalogs, purchasing cards and one-time accounts each solve part of the problem, but supplier onboarding for the one-off requirement remains.

  3. 03

    One fixed creditor for all one-off and small orders complements your catalog, and the supplier behind it needs no master data with you.

The simplest solution for indirect spend is one fixed route for everything that fits no catalog and no framework agreement. Instead of setting up a supplier for every one-off or small order, these orders run through a single creditor that is already in your system. This approach is called the Single Creditor Model. Pedlar handles the processing as a service provider: Pedlar's agents and team take care of ordering from the supplier, payment, shipment tracking and returns.

At a glance

  • Indirect spend gets messy wherever every one-off requirement calls for a new supplier and therefore a new creditor.
  • Catalogs, purchasing cards and one-time accounts each solve part of the problem, but supplier onboarding for the one-off requirement remains.
  • One fixed creditor for all one-off and small orders complements your catalog, and the supplier behind it needs no master data with you.

Why indirect spend gets messy so quickly

Indirect spend covers everything a company needs to keep running but does not build into its own product, from spare parts to individual services. It also includes tools, trade fair supplies, special hardware and software, and a large share of it is plannable and has long run through catalogs or framework agreements. The rest is where it gets messy.

This means requirements that come up once. They are spread across many departments, many suppliers and many small amounts, and because each case is small on its own, nobody in procurement looks after them specifically.

Pedlar's own order data shows how widely that rest can fan out: for a single customer, it adds up to more than 600 suppliers.

The real problem: too many suppliers for too little order volume

For a one-off requirement, procurement often needs a supplier that does not exist in its own system yet, because nobody has ordered that exact part before. Then supplier onboarding begins, with master data, bank details, checks and approval.

The spare part may cost €80. The process behind it is still the same as for a framework agreement worth six figures, with the same forms, checks and waiting times.

Every single order costs procurement time that is then missing for negotiations, supplier development and strategic categories. How long onboarding can take is shown in Why a simple order takes weeks, and the practical guide to administrative costs works out the effort.

Over time, this grows a creditor master file that nobody planned, in which many accounts have seen exactly one order. Anyone who does not want to wait for onboarding orders with the company credit card or bypasses procurement altogether. More on this in Preventing maverick buying.

Simple routes compared

There are several simple routes. Each fits a different part of the demand, and the question is whether it removes supplier onboarding for the one-off requirement or merely shifts it.

RouteFitsWhat remains
Catalog and framework agreementRecurring standard demand such as office supplies, workwear and safety gear, or IT accessoriesThe one-off requirement is missing from the catalog and still needs its own supplier
Purchasing cardSmall amounts with vendors that accept card paymentReceipts and account coding land with accounting, and not every specialist supplier accepts a card
One-time account (CpD)Rare suppliers without their own master recordName, address and bank details are entered again on every document
One fixed creditorAll one-off and small orders outside the catalogOne handling party has to be set up once

The first three routes leave supplier onboarding in place or shift the effort to accounting, as the article One-time account or 1 creditor shows. With a one-time account, the master record holds no address and no bank details; they are added with every posting, as SAP describes one-time accounts.

The simpler route: one creditor for all one-off and small orders

The fourth route starts earlier. All orders that fit no catalog go to one party that is set up once as a creditor and orders from the relevant supplier on your behalf. Your catalog stays in place for standard demand.

A typical quarter could look like this: maintenance needs a spare part for an old machine, marketing needs material for the trade fair stand and IT needs a special cable. The usual route turns this into three supplier onboardings and three creditors that never see another order. With one fixed creditor, it means three orders, one creditor and no new master record.

ERP · Creditor master · Sample quarter USUAL ROUTE New creditor per supplier 3 suppliers · 3 master records FIXED CREDITOR One-creditor model 1 master record · already set up Spare part, old machine No. 1000417 Spare part, old machine No. 1000123 MASTER DATA REVIEW APPROVAL CREDITOR ALREADY SET UP Trade fair stand material No. 1000418 Trade fair stand material No. 1000123 MASTER DATA REVIEW APPROVAL CREDITOR ALREADY SET UP Special cable, IT No. 1000419 Special cable, IT No. 1000123 MASTER DATA REVIEW APPROVAL CREDITOR ALREADY SET UP 3 NEW CREDITORS 0 NEW CREDITORS Master data, bank details, review, approval One creditor already in the system Three creditors that never see another order The supplier needs no master data with you Company card or bypassing procurement One invoice from Pedlar per order

How it works day to day

For this to work, the handling party has to be set up once and be able to take over every order in full. That handling party is Pedlar. Pedlar is set up once as a creditor in your ERP system.

After that, every one-off order follows the same four steps:

  1. You choose the items and suppliers and send the order to Pedlar.
  2. Pedlar orders from the supplier in its own name and pays the supplier.
  3. The goods go from the supplier directly to your site.
  4. You receive one invoice from Pedlar per order.

Your order goes out by email as usual, just to bestellungen@pedlar.de. Attach the quote or the product link. The supplier behind it needs no master data with you. Pedlar is already set up. More on the Single Creditor Model.

What goes away: no supplier onboarding, no one-off creditors

Procurement no longer has to check new master data, and accounting no longer has to maintain accounts that are never needed again after one order. Invoices come from Pedlar per order, no longer from dozens of suppliers with their own payment terms and bank details. As a result, they always run against the same creditor.

When the official route no longer requires supplier onboarding, there is less reason to order with the company credit card or bypass procurement. That keeps one-off requirements visible.

The time saved goes into negotiations with key suppliers, into maintaining framework agreements and into the categories that otherwise get left behind in day-to-day business. How to consolidate regularly needed C-parts alongside one-off requirements is covered in Consolidating one-off requirements and C-parts.

Who it pays off for

Three things speak for a fixed creditor. First, demand outside the catalog is spread across many suppliers that are each needed only once or twice. Second, supplier onboarding takes so long that departments work around it, and third, the amounts are too small for a dedicated framework agreement to be worthwhile.

This is typical in industrial companies with their own maintenance, with projects and with trade fairs, where spare parts, special hardware and individual services come up constantly and without a fixed rhythm. More examples are in Small orders under €500. For purely standard demand, the catalog is enough.

Frequently asked questions

Does a fixed creditor replace our catalog?

No. The fixed creditor is meant for orders that fit no catalog, and you keep ordering everything plannable through your catalog and framework agreements.

Who is the contracting party for returns and warranty?

Your service provider and contracting party is Pedlar, including for returns and warranty. Pedlar orders from the supplier in its own name and pays the supplier.

What has to change in the ERP system?

Only the one creditor is added. That is the only change needed to get started; there is nothing to integrate, maintain or train.

Conclusion

Indirect spend becomes simpler when the requirements outside catalogs and framework agreements get one fixed route that works without new supplier onboarding. A fixed creditor is that route. It takes supplier onboarding out of every one-off order.

Find out how the Single Creditor Model brings your one-off and small orders onto a single creditor: Book a call →

Recommended reading